Remove the garage door opener from the torsion bar, remove cover screws and set the cover aside.ģ. Be sure power is NOT connected to the opener, and disconnect power to circuit.Ģ. To make a permanent connection through the 7/8 inch hole in the back of the garage door opener (according to local code):ġ. If permanent wiring is required by your local code, refer to the following procedure. DO NOT run garage door opener at this time. Plug in the garage door opener into a grounded outlet.Ģ.
#Lift master key pad install#
If the plug doesn’t fit into the outlet you have, contact a qualified electrician to install the proper outlet.ġ. This plug will only fit into a grounding type outlet.
To reduce the risk of electric shock, your garage door opener has a grounding type plug with a third grounding pin. If rope knot becomes untied, you could fall. NEVER use emergency release handle to pull garage door open or closed. NEVER use emergency release handle unless garage doorway is clear of persons and obstructions.Ĩ. Weak or broken springs or unbalanced door could result in an open door falling rapidly and/or unexpectedly and increasing the risk of SEVERE INJURY or DEATH.ħ. Use caution when using this release with the door open. If possible, use emergency release handle to disengage trolley ONLY when garage door is CLOSED. NO ONE SHOULD GO UNDER A STOPPED, PARTIALLY OPENED DOOR.Ħ. NO ONE SHOULD CROSS THE PATH OF THE MOVING DOOR.ĥ. ALWAYS keep garage door in sight and away from people and objects until completely closed. ONLY activate garage door when it can be seen clearly, it is properly adjusted, and there are no obstructions to door travel.Ĥ.
NEVER permit children to operate or play with garage door control push buttons or remote controls.ģ. ALWAYS keep remote controls out of reach of children. READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS.Ģ. To Open the Door Manually.ĭoor Control.īattery Backup.
0 kommentar(er)
